Disturbingthepeace

StreetFighters => Finished Builds => Topic started by: wraith600 on May 23, 2011, 03:58:59 PM

Title: my fazer 6
Post by: wraith600 on May 23, 2011, 03:58:59 PM
the story so far

'98 fazer 600 ,2000 mille forks/yoke, factory oz racing wheel, galfer disks, billet 6 pots, 2003 r1 rear subframe & Harris body work modified fairing. k&n filter, dinojet kit  micron/performance racing parts exhaust. ohlins shock .180 kg wet :big grin:

next
mille swingarme  & factory wheel to go on later in the summer

new rear callaper including pads ? 30 :big grin: from

http://shop.ebay.co.uk/nuadthaiderm/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p4340
Title: my fazer 6
Post by: Froudy on May 23, 2011, 04:59:41 PM
That Mille swinger and wheel is going to look cool as mate:cool2:
Title: my fazer 6
Post by: Filthy on May 23, 2011, 05:00:59 PM
I like that, proper streetfighter.
Title: my fazer 6
Post by: SFC on May 23, 2011, 05:50:04 PM
nice bit of kit going on there :nodyes:
Title: my fazer 6
Post by: Dookie on May 23, 2011, 07:41:42 PM
nice m8 swinger will look the tits:nodyes:
Title: my fazer 6
Post by: Finbar on May 23, 2011, 08:43:10 PM
Bloody smart :big grin:
Title: my fazer 6
Post by: wraith600 on May 24, 2011, 09:12:49 PM
thx its taking time but its slowly geting there :nodyes:
Title: my fazer 6
Post by: wraith600 on May 29, 2011, 10:42:33 PM
done some more mesurements looks good but will be tight only 8 mm to play with
Title: my fazer 6
Post by: scarface on May 29, 2011, 10:44:38 PM
Sweeeeet :loveit:
Title: my fazer 6
Post by: wraith600 on June 20, 2011, 09:27:26 AM
been looking at the work involved in fitting the mille swingarm and decided it would be above my skill level so its booked in with stig for:nodyes: the end of july
Title: my fazer 6
Post by: wraith600 on August 10, 2011, 06:43:17 AM
ok the bikes off with stig now and its going to be a bit of work but its going to work :big grin: will add some photos soon
Title: my fazer 6
Post by: "M" on August 10, 2011, 08:19:33 AM
That swinger and wheels gonna look lush.
Title: my fazer 6
Post by: wraith600 on August 11, 2011, 06:33:56 AM
latest  

"So...Frames pivot bosses cut out and is now wide enough to accept the arm.
I turned up the top hats to bring the spindle dia down to 16mm.
The sprocket side top hat replaces the screw in affair on the Aprilia.
Just got to finalise the width of spacing....need to take a mil off the left side.
Tomorrow i will start the major surgery on the Aprilia arm. "

looking good :big grin: thanks to STIG
Title: my fazer 6
Post by: wraith600 on August 11, 2011, 06:43:54 AM
ALSO FITTED A NEW REV COUNTER BEFORE I DROPPED THE BIKE AT STIG'S

THE MOUNTING & DASH IS NAF ILE TRY TO SORT IT OUT BETTER LATER

the rev counter was only ?45 from these

http://www.autodials.co.uk/

even has a small shift light and provision for a bigger one
Title: my fazer 6
Post by: wraith600 on August 25, 2011, 09:10:04 AM
well ive got it back from stig :big grin:
Title: my fazer 6
Post by: "M" on August 25, 2011, 09:26:26 AM
Looks well.
Title: my fazer 6
Post by: Spank54 on August 25, 2011, 09:47:04 AM
That swinger looks the mutts:nodyes:
Title: my fazer 6
Post by: Froudy on August 25, 2011, 09:48:33 AM
Liking that Wraith:cool2:
Title: my fazer 6
Post by: Finbar on August 25, 2011, 01:49:21 PM
Very very nice.......miss my FZS600 a lot... :cry:
Title: my fazer 6
Post by: wraith600 on October 09, 2011, 03:51:02 PM
an update had an issue with chain clearance in the clutch cable to push rod thing so out with the hacksaw  a lot cheaper than spending ?200 on a 520 chain  + sprockets
Title: my fazer 6
Post by: wraith600 on October 09, 2011, 03:54:51 PM
2 more pix
Title: Re: my fazer 6
Post by: wraith600 on April 16, 2017, 03:11:15 AM
not been on in quite  a bit this is how the old girl is now 

(http://i1124.photobucket.com/albums/l568/wraith600/IMG_20160414_141207.jpg) (http://s1124.photobucket.com/user/wraith600/media/IMG_20160414_141207.jpg.html)
Title: Re: my fazer 6
Post by: Froudy on April 16, 2017, 12:38:09 PM
I got your picture to show Wraith ;)

Looking good mate 8)