Just wondering if anyone has had thier bike rolling roaded?
And what figues you were putting out.
I had mine tested on a
Fuchs BEI251 - From sussex rolling road in Worthing
My bike is a 1989 H1 ZXR 400
it made 62 HP @ 13k
Rolling Road
Moderator: Moderators
-
- Posts: 95
- Joined: Sat Mar 24, 2007 9:01 am
- My Bike: tomos moped
- Contact:
-
- zxr400 oc member
- Posts: 307
- Joined: Sun Mar 28, 2004 8:34 am
- My Bike: tomos moped
- Contact:
Re: Rolling Road
Well i have had many readings so i will pump out just two
Mark Hill Dyno sorry not sure of make 78bhp before setting up the bellmouths
And on my website there is a dyno company called dyno pro click to see the dyno they use 72bhp and dropped through the season at the end of the year with no refresh we had 68bhp and rev to 14.5 but power was still climbing but didnt go for a ignition box to allow to rev 16 didnt feel the need
All on a full race zxr 400H2 with a H2 s.p engine
All work carried out by Hodson engineering
But thats a good figure mate 62bhp
Simon Lowes M.R.O. 600
Brands G.P this weekend should be fun with 117ish bhp
Mark Hill Dyno sorry not sure of make 78bhp before setting up the bellmouths
And on my website there is a dyno company called dyno pro click to see the dyno they use 72bhp and dropped through the season at the end of the year with no refresh we had 68bhp and rev to 14.5 but power was still climbing but didnt go for a ignition box to allow to rev 16 didnt feel the need
All on a full race zxr 400H2 with a H2 s.p engine
All work carried out by Hodson engineering
But thats a good figure mate 62bhp
Simon Lowes M.R.O. 600
Brands G.P this weekend should be fun with 117ish bhp
- BANJO
- Posts: 159
- Joined: Sat Jun 16, 2007 7:02 pm
- My Bike: ZX4R NINJA
- Location: dawlish devon
Re: Rolling Road
I was told when i picked my bike up(1995 zxr400L5) that it was 68hp but no sheet. But i do have a sheet with 61hp but that was back in 2005

Banjo

Banjo
