h1 update

Welcome to the ZXRworld forum.

Moderator: Moderators

Post Reply
Tom mccrea
zxr400 oc member
zxr400 oc member
Posts: 89
Joined: Fri Jul 16, 2010 3:14 pm
My Bike: H1zxr400&cbr600fw
Location: Carrickfergus N.Ireland

h1 update

Post by Tom mccrea »

well the front brakes are now pretty much sorted out, need to order some seals but they are working ok. the back brakes are binding quite a lot and the bleed nipple is broken off so will have to be drilled out, great! On the bright side its progress i suppose.?
User avatar
reds
L-plate hell
L-plate hell
Posts: 250
Joined: Thu Aug 21, 2008 1:21 am
My Bike: ZXR 400
Location: Stourport On Severn

Re: h1 update

Post by reds »

i had the same problem with mine snapping on the rear, but managed to fit it and bleed it fine with the other nipple, didnt need both of them - one was enough to get the fluid into the whole caliper
Post Reply