www.zxrworld.co.uk

Getting reading to start the L5 after 2 years, have cleaned the carbs etc, etc.

Took the two halves of the airbox apart to remove the s and other crud, cleaned it out and re fitted it.

Was looking on the microfiche on here this morning and according to that there should be a seal between the two halves.

The microfiche is for L1 to L3 models, should my L5 have the seal as well?

Bet those fooking s have had it away :smt013

Look carefully the seal may well still be there it is only a thin strip of foam which sits in a groove on the lower section of the box

Thanks, i'll have another look later.