Page 1 of 1
Do you think ......
Posted: Mon May 10, 2010 12:50 pm
by Mori Man
....... this will squeeze into the frame
IMG_1531.jpg
Wish it would, stage 3 tuned big bore
IMG_1532.jpg
Those stainless cam cap bolts fit though
IMG_1528.jpg
Thank fook I don't lug these about all day
Re: Do you think ......
Posted: Tue May 11, 2010 10:51 am
by RedexRobB
That wouldnt be the 900 turbo would it? Thats a proper clean engine there too.
Re: Do you think ......
Posted: Tue May 11, 2010 11:25 am
by Mori Man
GPz900R A10 motor, now:
Wiseco 1050cc Pistons
Re-sleeved block still 55mm stroke
Yoshimura ST-1 adjustable cam's
Head skimmed ,ported and profiled
Crank Dynamically balanced + weight reduction
Con-rod's weight aligned
All tolerances adjusted/set to race spec' (Blueprinting)
Head by-pass oil line
Sump by-pass oil line
ZX-11 Oil pump
All internal, O rings, seals and bearings re-placed
New outer casings with some choice billet on it's way
Tuners washed the motor down but casings were still stained, I've been giving them a clean up
Still to bring the spare H frame in from the veranda and check - got to know
