www.zxrworld.co.uk

Have a rolling chassis off a zxr4 G model 88 less the fairings,its been in my shed for over 2 yrs i know they are a bit scarce, have the engine which still turns over nicely, and seat unit

Is it true the cams in the G engine are of a similar but less aggressive grind to the Sp model?

Would these cams drop straight into one of my L models ?

Are wheels a direct swap?

Not sure what to do with the remains of this bike ya see

cams are meant to be better than later ones but exactly how in terms of lift/duration i dont know

wheels dont fit anything.., although i have previously fitted H model front and rear ends to a G frame, both as a roadbike, and as a racebike.. but you need to swap everything - yoke's, forks,swingarm etc, then sleeve the swingarm pivot and have a lug welded onto the frame for the front end of the brake arm

Hi Zimm, Do you have a picture of where the lug has to be welded to frame for the brake arm, also what do you mean by sleeve the pivot.
I am going to be fitting H back end onto my ZX4 soon.

Thanks.