Rainy Season
Posted: Fri Jun 17, 2011 3:52 am
It arrived early this year - like three weeks early ! 
Mind you two of them I was bed / flat bound with a herniated disc
and the third just recovering but this week has seen a big improvement all round - still raining though ! 
We do get days of sunshine from time to time which soars the humidity up into the 80+% - now that is sticky
Got to be nearly 2 weeks since been out on the bikes so they have just been sat under their covers collecting dust &
s 
But it's not all doom and gloom as I get to play with shiney bits indoors
This GPz9 arm fits the ZXR
For the H I would need a new axle pin made as this one is 20mm which I think the L uses 
Have seen L arms converted for use on the GPz by cutting out the middle section of the pivot shaft tube
The owner is doing a 17" conversion on his bike so he ordered all this too
Galespeed Type R , Metalic Black with Quartz coating
One day the H will dorn a set of these 
Next was getting the front end sorted out :
These allow 43mm front forks - either ZRX11/1200 or Ohlins ( This could also possibly fit my ZRX400 headstock), he went for
With these for fitting radial calipers
There is also a chain roller guide , adjustable torque link and Fr n Rr Sunstar sprockets too. Next will be a rear caliper hanger , just need to know what he wants to fit
Sometimes it's OK that it rains
Plus summer is round the corner and this is whats in store at the beach
http://video.jp.msn.com/watch/video/%E6 ... 8%7C%7C%7C
MM!
Mind you two of them I was bed / flat bound with a herniated disc
and the third just recovering but this week has seen a big improvement all round - still raining though ! We do get days of sunshine from time to time which soars the humidity up into the 80+% - now that is sticky
Got to be nearly 2 weeks since been out on the bikes so they have just been sat under their covers collecting dust &
s But it's not all doom and gloom as I get to play with shiney bits indoors
This GPz9 arm fits the ZXR
For the H I would need a new axle pin made as this one is 20mm which I think the L uses Have seen L arms converted for use on the GPz by cutting out the middle section of the pivot shaft tube The owner is doing a 17" conversion on his bike so he ordered all this too
Galespeed Type R , Metalic Black with Quartz coating
One day the H will dorn a set of these Next was getting the front end sorted out :
These allow 43mm front forks - either ZRX11/1200 or Ohlins ( This could also possibly fit my ZRX400 headstock), he went for
With these for fitting radial calipers
There is also a chain roller guide , adjustable torque link and Fr n Rr Sunstar sprockets too. Next will be a rear caliper hanger , just need to know what he wants to fit
Sometimes it's OK that it rains
Plus summer is round the corner and this is whats in store at the beach
http://video.jp.msn.com/watch/video/%E6 ... 8%7C%7C%7C
MM!
