L1 model with the right colours
Posted: Tue Dec 07, 2004 11:13 pm
L model zxr400, green white and blue with pink wheels, what more could you ask for?
Page 1 of 3
Posted: Mon Dec 20, 2004 6:49 pm
double bubble screen.
Posted: Mon Dec 20, 2004 8:01 pm
nitrous.
Re: L1 model with the right colours
Posted: Sat Jun 18, 2005 8:59 pm
masterofinsanity wrote:L model zxr400, green white and blue with pink wheels, what more could you ask for?
what more could u ask for ?? , well since u asked , kawasaki green with a small bit of white at the tip , R1 rear subframe and ferin parts , the new 636 swinger / style of swing arm with curves
, 444 kit , rejetted and k and n's with full micron system ( gem has pretty much gone this far ) get rid of the mirrors for some sleeker looking ones , polished the frame and swinger , polish the foot rests brake / clutch levers , rossi style wheels or polished wheels , i dunno this list goes on , anyone wanna add to this ?? , Rob
Posted: Sat Jun 18, 2005 9:28 pm
Wavy disks 
But not from ABE
But not from ABE
Posted: Sun Jun 19, 2005 11:55 am
bigger rear sprocket , Rob
Posted: Sun Jun 19, 2005 5:55 pm
ive tried to fit a 50 tooth but its just too big.RobZX636RNinja wrote:bigger rear sprocket , Rob
longer chain or mill out the spindle slots on a second hand swing arm maybe.dunno yet.
i need to run a 50 rear for more fun riding
Posted: Sun Jun 19, 2005 9:09 pm
You mean easier wheelies???fever wrote:ive tried to fit a 50 tooth but its just too big.RobZX636RNinja wrote:bigger rear sprocket , Rob
longer chain or mill out the spindle slots on a second hand swing arm maybe.dunno yet.
i need to run a 50 rear for more fun riding
Posted: Mon Jun 20, 2005 4:47 pm
yup 
Posted: Tue Jun 21, 2005 8:14 pm
Just put a 14 tooth on the frontfever wrote:ive tried to fit a 50 tooth but its just too big.RobZX636RNinja wrote:bigger rear sprocket , Rob
longer chain or mill out the spindle slots on a second hand swing arm maybe.dunno yet.
i need to run a 50 rear for more fun riding
, much cheaper as well Posted: Thu Jul 21, 2005 5:33 pm
This seat unit?
Infact all of the bodywork with a blade headlight mounted in.
Infact all of the bodywork with a blade headlight mounted in.
Posted: Thu Jul 21, 2005 7:43 pm
very nice paint job
Posted: Thu Jul 21, 2005 8:07 pm
mmmmmmhmmmmmmmmmmm, i dare say that rear seat is better looking than mine
Where dya get it and how much??
Where dya get it and how much??
Posted: Fri Jul 22, 2005 12:17 pm
If I told you that then it wouldn't be as special would it.
contact Roger on 01757 248677.
Seat unit costs £60, undertray is £ 25.
In the pics note the carbon tank cover, rear brake caliper mounted above swinger, fairing brace and the ram air.
contact Roger on 01757 248677.
Seat unit costs £60, undertray is £ 25.
In the pics note the carbon tank cover, rear brake caliper mounted above swinger, fairing brace and the ram air.
Posted: Fri Jul 22, 2005 5:07 pm
crickey, and i paid 120 quid for my genuine kwak sp seat unit 
Mine you the seat unit would be no good as theres no lights but im sure i can make adjustments if i were to buy one
Some special bits there alright. What made ya go for the caliper on the top of the swinger? And where dya get the carbon tank cover?
Come on tell us!!
Mine you the seat unit would be no good as theres no lights but im sure i can make adjustments if i were to buy one Some special bits there alright. What made ya go for the caliper on the top of the swinger? And where dya get the carbon tank cover?
Come on tell us!!