Page 1 of 1

Restoring a shaggy old l3

Posted: Sun Jul 30, 2017 5:47 pm
by bumble72
Dear All

I bought an L3 in Jan and did nothing with it til last weekend when I did a little tidying up on its sorry condition before a motorway test ride which it managed well by and large.
Not so well was a mega flat spot around 3krpm. Probably needs a reject for the micron. But I don't the shitty racket microns make.

Could anyone recommend an exhaust or slip on thats light, quiet and ideally won't require rejetting from standard. A heard a scorpion on you tube. It sounded quite quiet. If necessary I will rejet, but obviously if I can avoid, so much the better.

Also could anyone recommend where to get a double bubble screen cheap. Cheapest I,ve seen between eBay and Amazon is £41, which seems steep to me.

Thanks very much.

Bumble

Re: Restoring a shaggy old l3

Posted: Sun Jul 30, 2017 6:48 pm
by Miles
Stock can

Re: Restoring a shaggy old l3

Posted: Wed Aug 02, 2017 9:49 am
by Mori Man
Did Motad ever do a system for the bike , that will be quiet ?

Still a couple months away from hauling mine out the garage and getting in about it.

Re: Restoring a shaggy old l3

Posted: Fri Aug 18, 2017 9:35 am
by bumble72
Miles wrote:
Sun Jul 30, 2017 6:48 pm
Stock can
I don't have the original.
Does it has a nice burble?

Re: Restoring a shaggy old l3

Posted: Fri Aug 18, 2017 9:37 am
by bumble72
Mori Man wrote:
Wed Aug 02, 2017 9:49 am
Did Motad ever do a system for the bike , that will be quiet ?

Still a couple months away from hauling mine out the garage and getting in about it.
Hmm, not too sure.
Might have a look utub to see if someone,s got a recording. Although most people record these things in their garages which strikes as odd as generally I don't like being gassed by my own exhaust. Also the echoes are really how it sounds in the open.