www.zxrworld.co.uk

Took of the old pipes and put them aside, went to tidy them away, and as i picked them up this happened
Think the paste was just holding it together.

bit of sellotape they will be right as rain again!

So do we get pics of the new pipes???

As soon as they're fitted properly :S
One of the bolts had sheared of, and another it bent lol
Slightly bodged so i can get to work, but will have to sort it out when i have enough time, which i find hard to come by these days

couple of cider cans, some coathanger wire and a tub of paste and that'll be fine.

My new can

Looks nice that Oli. You couldn't of come to donny with those pipes!

Slight problem!
The can is now rubbing on the swing arm :smt013
Have no idea why, was fine yesturday, but now i have taken the pipes off thjen on again its rubbing
Any sugestions on how to push the can out a little?

Any sugestions on how to push the can out a little?

Big ass hammer?


Double check your refittings. There should be no reason for it to change shape.

I would, but i really cba after doing it so many times lol.
Plus it got dark before i had chance.

Probs have another look next weekend.

it looks like you have put the exhaust can support strap round each side of the hanger? is it not possible to have it on the outward facing part of the exhuast bracket, making it come over a few mm. You may also want to think about behind the exhuast bracket out a little further to stop the exhaust can eating into the swingarm....

Yeah they way you put the strap on might make a difference. It used to do it on my old ZXR, i just pulled the exhaust outwardstill the exhaust bracket was bent enough outwards that it help the can in place where it didnt rub the swinger.