hmmm question for ya
Posted: Sat Oct 18, 2008 9:55 pm
Got a H2 zxr750 but it needs an engine...do any of ya know what engines will fit in the frame without much alteration??? will a zx9 fit?
Page 1 of 2
Re: hmmm question for ya
Posted: Sun Oct 19, 2008 11:27 am
There's some interesting stuff here: http://homepage.ntlworld.com/webzxr/zxr750r/ including modified bikes in the tuning section, but I'm not sure that there's any H2s, it seems to be the Ls onwards, the Hs had quite different frames and engines
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 11:20 am
The 1st GPX750 used the same engine, mine kicked out 103BHP in complete standard form.
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 11:44 am
what about this ? http://cgi.ebay.co.uk/KAWASAKI-ZXR-750- ... 286.c0.m14
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 12:27 pm
Looks like a no reserve on that 
66K miles is nothing for these motors (if serviced) and is the GPX motor with different casings.
I also think
the "Bol Dor " 1000RX used the same motor but the ZX10 was the GPz engine or the other way around
MMmmmmm "Bol Dor" they were the evolution motor too not the revolution
66K miles is nothing for these motors (if serviced) and is the GPX motor with different casings.
I also think
the "Bol Dor " 1000RX used the same motor but the ZX10 was the GPz engine or the other way around MMmmmmm "Bol Dor" they were the evolution motor too not the revolution
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 12:32 pm
its basicly the same engine as the gpx/z but its got differnt cams and stroke iirc as well as some other changes
the zx9r engine fits into the ZXR7 frame better than it dos on the ZX7R
http://homepage.ntlworld.com/webzxr/zxr ... xr7-9.html
the zx9r engine fits into the ZXR7 frame better than it dos on the ZX7R
http://homepage.ntlworld.com/webzxr/zxr ... xr7-9.html
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 2:10 pm
It's got to be the early ZX9R - models B1-B4 from 1994 to 1997.
If you're handy with the spanners, I have a B1 lump that's eaten a valve on the #1 piston. Make me an offer for it and if you can collect it it's yours.
If you're handy with the spanners, I have a B1 lump that's eaten a valve on the #1 piston. Make me an offer for it and if you can collect it it's yours.
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 2:14 pm
i was just gonna pm you about this lol.
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 2:18 pm
LOL this morning I've been feeling guilty that I haven't had it apart yet, then this thread popped up!masterofinsanity wrote:i was just gonna pm you about this lol.
Not that I'm lazy or anything...
Re: hmmm question for ya
Posted: Mon Oct 20, 2008 4:04 pm
sod that seems too much hard work for me.
Re: hmmm question for ya
Posted: Tue Oct 21, 2008 9:32 am
Ah thanks for the replies, but dropped on cos my dad has gpx 750, and he happened to have a spare crank that he let me have!! sooooo engine has crank now in place and basically gpx bottom end but with zxr750 barrels pistons, carbs etc and it is running sweet.... Just gotta sort the fairings now.... should look cool when its done.
Re: hmmm question for ya
Posted: Fri Oct 31, 2008 8:24 am
wheres these pics then?
Re: hmmm question for ya
Posted: Mon Nov 03, 2008 9:25 am
lol when its worth taking pics i will... just debatin whether to put a j model engine in instead hmmm race tuned one too ..... choices choices
Re: hmmm question for ya
Posted: Mon Nov 03, 2008 12:15 pm
The J engine only had SP carbs and cams iirc. If theres extra work been done then they can be made in to right animals (150 bhp +..)
Re: hmmm question for ya
Posted: Mon Nov 03, 2008 12:39 pm
hi rene, the engine runs sweet, been on the track and tested etc... not sure of what bhp stands at the mo tho. just thought it would be a better move to put that engine in the h2 frame