www.zxrworld.co.uk

bought some 10w/40 from halfords thought yay change the oil . ready for next week if i get teh clear from the hospital ..

get under the bike WTF!!!! NO SUMP PLUG!!!.



so i kinda farted about thinking WTF its been welded over i assume someoen overtightend it and cracked the sump ....


so after 10 mins or so i too the filter off and the pipes goign to the oil cooler . and craked the engine over with the plugs out so it spat most of the oil out... (probaly shouldnt do this )


and then left it drippign for an hour or so. then put fresh filter on and put hoses back on cooler. then filled back up with oil . now nice and fresh admitedly yhere will be a slight amount of old oil in there. but best i could do without taking the sump off an exhausts etc

WTF?

Are you sure you didn't miss it? lol!

Assuming you're talking about an L model, if it's just got a lump of weld over the alloy casing, I'm not sure I'd trust that!

H model . its just been ally welded smooth . i couldnt beleive it .

where the rusty bolt is. there is just smooth doesnt even look like its been welded!!! ><

haha. wouldn't it have been easier to suck the oil out? i suppose it would be hard if you don't have an extractor of some sort..

suck ??? and get that crap in my gob no thanks!

and the bike is stripped down atm so plugs out was a case of just pull them out

Damn, not heard of that before. Get a pic for us, id like to see that!

RedexRobB wrote:Damn, not heard of that before. Get a pic for us, id like to see that!

will do so tomorrow