hi mates, I need to know the internal bore diameter of the L model carburettor's
I finally think I have a problem with mines, because there are eroded on the inside ... so I am measuring them and I need to know how much mm is the internal bore diameter
internal bore diameter carburattors original
Moderator: Moderators
-
- Posts: 21
- Joined: Mon Nov 21, 2011 2:18 am
- My Bike: ZXR 400 L4
-
- Posts: 46
- Joined: Sat Jun 02, 2012 7:30 pm
- My Bike: Zxr400 H1
Re: internal bore diameter carburattors original
Measure them and find out or look in the manual
-
- Posts: 21
- Joined: Mon Nov 21, 2011 2:18 am
- My Bike: ZXR 400 L4
Re: internal bore diameter carburattors original
I mean, I need to know how much mm are they new ... or supposly new
in the manual doesn't say it.
in the manual doesn't say it.
- banner001
- Track day God
- Posts: 2591
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: internal bore diameter carburattors original
there are 2 bore sizes, both standard, 30mm and 32mm.
the 30mm will give slightly better midrange compared to the 32mm, but the 32mm will flow more air at high rpm and give a slight edge over the 30mm.
i have some 32mm carbs in excellent working order in the classifieds section.
the 30mm will give slightly better midrange compared to the 32mm, but the 32mm will flow more air at high rpm and give a slight edge over the 30mm.
i have some 32mm carbs in excellent working order in the classifieds section.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said