fcr33 main jets,pilot jets ,needels

Moderator: Moderators

Post Reply
supercool7712
Posts: 3
Joined: Fri Mar 01, 2013 1:43 pm
My Bike: zxr400

fcr33 main jets,pilot jets ,needels

Post by supercool7712 » Fri Jun 27, 2014 2:37 pm

hi every one,
i need help i have a set of fcr33 flat slides witch need main jets,pilot jets, air jets,needels ect,any imfo on sizes of jets needel part numbers would be a great help thanks?

regards
paul

User avatar
banner001
Track day God
Track day God
Posts: 2269
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: fcr33 main jets,pilot jets ,needels

Post by banner001 » Sun Jun 29, 2014 10:22 am

Ring up allens - http://www.allensperformance.co.uk they will be able to assist you, note fcr's have customiseable needle angles and lengths, so there is not 1 ideal part number for you...you need to test a few or take it to a proper tuners.
UK ZXR 400 L4
UK ZXR 400 L3 track bike
1989 FZR 1000 EXUP-R streetfighter

User avatar
zimm
zxr400 oc member
zxr400 oc member
Posts: 2318
Joined: Tue Oct 10, 2006 12:32 am
My Bike: ZXR400-M4
Location: Herefordshire

Re: fcr33 main jets,pilot jets ,needels

Post by zimm » Sat Jul 26, 2014 3:21 pm

I can tell you whats in mine (well i'd have to check the minor stuff) but thats not going to help unless you're running OEM FCR's with the TPS/solenoid and the standard SP airbox/exhaust.

My bike is stock except for the exhaust and all ive done is drop the needles (91EXR) to 2nd clip and fitted #88/#90 mains (up from #85/#88).. I wouldnt say its *quite* there .. but at least it'll idle, accelerate without lurching and take full throttle without dying now :)

Aftermarket FCR's are completely different, no choke, different needle codes, no tps/solenoid contraption.. and jetting is going to vary depending on your airbox/lack of from, well, #88 to #130
_____STP RACE PRODUCTS_____
01432 278103 : 07768 847994

User avatar
U_h0rnet5
zxr400 oc member
zxr400 oc member
Posts: 276
Joined: Mon Jun 26, 2006 11:48 pm
My Bike: ZXR400
Location: Watford
Contact:

Re: fcr33 main jets,pilot jets ,needels

Post by U_h0rnet5 » Thu Dec 28, 2017 5:28 pm

Sorry to pull an old thread
zimm wrote:
Sat Jul 26, 2014 3:21 pm

My bike is stock except for the exhaust and all ive done is drop the needles (91EXR) to 2nd clip and fitted #88/#90 mains (up from #85/#88).. I wouldnt say its *quite* there .. but at least it'll idle, accelerate without lurching and take full throttle without dying now
Zimm just wondering how many turns you have adjusted your pilot screws to?

Post Reply