Page 1 of 3

Show me power

Posted: Fri Jun 15, 2012 7:40 pm
by Big Hoddie
Ive found two ramair systems, one from ams and bbk, but dont know which to get; advice? And once i have enough, getting a Beet system. What else do i need to do and where can i get the parts? And what do i need to do to convert the l9 to take '03 zx6r wheels?

Re: Show me power

Posted: Fri Jun 15, 2012 9:31 pm
by CaNsA
Chat to Mori Man, hopefully he will drop in soon.
He can get anything you want. :D

Re: Show me power

Posted: Fri Jun 15, 2012 10:51 pm
by Big Hoddie
I was nosing round the racing forum, and if i get the stuff, i can do it myself. Considering modding this http://tyga-performance.com/site/produc ... ts_id=1528 or possibly an nsr500 aftermarket kit. Thoughts? I know what exactly im going to do to the vfr, but i have no clear idea on the L9's direction and as i can only afford one at a time, might research the ninja's potential avenues and focus on the vfr. Don't get me wrong, as and when stuff appears for the ninja, it'll be snapped up. That or I could run the 2 projects together, but will need a road bike to get me about-any recommendations? I don't want a babyblade (it'd only turn into another modernisation and tuning project winks ) but a little unsure of a gsxr400 and fzr400's ability to last through british winters.....

Re: Show me power

Posted: Mon Jun 18, 2012 1:00 pm
by Big Hoddie
viewtopic.php?f=55&t=8326

Think zx9r wheels are going on plus front forks if its a straight drop :D but will the front fairings be affected? And by front end, does he mean forks, wheels, discs, calipers, steering stem, yokes, clip ons and brake lines or just wheels and forks and discs?

Re: Show me power

Posted: Mon Jun 18, 2012 2:10 pm
by Big Hoddie

Re: Show me power

Posted: Mon Jun 18, 2012 6:17 pm
by banner001
well, depends on if you have 35-41mm flatslides or not...i suspect not...

Re: Show me power

Posted: Mon Jun 18, 2012 10:46 pm
by Big Hoddie
Nope. Where can i get some?

Re: Show me power

Posted: Tue Jun 19, 2012 1:06 am
by bendog66
Big Hoddie wrote:Nope. Where can i get some?
You'd probably have to get written into someones will who owns a set. And it would then be cheaper to hire a hitman to make the will come into effect than having to buy them outright.

Seriously though they're about as common as rocking horse toad and cost about 600 quid

Re: Show me power

Posted: Tue Jun 19, 2012 9:15 am
by Big Hoddie
Will just fit ramair box, yoshi or blue stacks and maybe bellmouths and either a beet exhaust or scorpion system with some nice downpipes, just not sure which one's the best value for money...?

Re: Show me power

Posted: Tue Jun 19, 2012 12:55 pm
by Big Hoddie

Re: Show me power

Posted: Tue Jun 19, 2012 1:32 pm
by Big Hoddie

Re: Show me power

Posted: Tue Jun 19, 2012 5:15 pm
by CaNsA
FFS, For all the money you have you could buy a zxr400 that has all this crap already done.....

Or havent you worked this out yet?

Oh and FWIW, Hoddie + Big Hoddie seem mighty similar..

Re: Show me power

Posted: Tue Jun 19, 2012 6:27 pm
by Big Hoddie
Oh no, not saying Im gonna get the carbs, just was supposed to be a quip about the price ahahaha. I've already worked out that I'm better off buying blue stacks for the normal carbs or the yoshimura ones, as the bikes primary purpose is a fast road bike that can do the occasional track stint

Re: Show me power

Posted: Wed Jul 04, 2012 7:19 am
by Wabby
CaNsA wrote:FFS, For all the money you have you could buy a zxr400 that has all this crap already done.....

Or havent you worked this out yet?

Oh and FWIW, Hoddie + Big Hoddie seem mighty similar..
He's bought my old 400 Cansa - So will need to buy all the trick bits as its standard (ish) when sold too him (other than levers etc - he didnt want the solo seat unit either so thats for sale).

Them flat slides are made of unobtainable.

Re: Show me power

Posted: Wed Jul 04, 2012 9:28 pm
by Big Hoddie
Been showing it off wabby ;)