www.zxrworld.co.uk

Hi,
wondering what other carb fitments that will bolt on easily to my 88 zx400g?

I have fitted ZXR 32mm on mine.

Straight swap as it is the internal diameter that changes so you don't have to change the inlet rubbers.

Also in the process of swapping out the pick up and rotor and using a H cdi. If it works or not will keep you posted.

wicked cheers for that

ZX4R-F3 wrote:I have fitted ZXR 32mm on mine.

Straight swap as it is the internal diameter that changes so you don't have to change the inlet rubbers.

kinda ..

they'll fit.. but there'll be a step from the carbs into the smaller rubbers .. you really need ZXR inlets that match the carbs.