Page 1 of 1
Changing carbs
Posted: Thu Jul 02, 2015 10:29 am
by AlexH
Hi folks just wondering if it's possible to swap carbs from a '02 for a set from a '98 model. I know they're both L models so I can't see any reason why not but it's always good to double check with guys like yourselves.
Cheers
alex
Re: Changing carbs
Posted: Thu Jul 02, 2015 10:33 am
by Miles
As far as I'm aware that should be ok.
Just check if they both have the "Icing" circuit on them or your have to block it off etc
Re: Changing carbs
Posted: Thu Jul 02, 2015 12:03 pm
by zimm
needles and main jets may differ. If so fit the ones from your original set.
Re: Changing carbs
Posted: Thu Jul 02, 2015 1:27 pm
by CaNsA
Also, might be worth checking if the are both either 30mm or 32mm carbs.
The ZXR400 UK model has 32mm carbs, some of the JDM L models have 30mm carbs.
Re: Changing carbs
Posted: Sun Jul 05, 2015 10:32 am
by AlexH
Nice one folks. Gotta ask tho wat is the icing circuit?
Re: Changing carbs
Posted: Sun Jul 05, 2015 11:11 am
by Miles
Coolant hoses that run along the back of the float bowls. There too prevent carb icing