Has anyone had the problem of the pilot needle tip broken inside the carb?
just taken them out to clean them and i've found one of them has broken inside and i dont know how to get it out....
http://imgur.com/N5yROTa
pilot needle tip
Moderator: Moderators
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
-
- Posts: 197
- Joined: Fri Jan 25, 2013 12:33 pm
- My Bike: CBR600RR, ZXR400 L-2
- Location: Waterlooville, Hampshire
Re: pilot needle tip
Hmm that's a tricky one, can't really tell much from the picture! Worst comes worse a replacement is available from Cradley's:
http://www.kawasakioriginalparts.com/ka ... 1992&ca=GB
Part number: 130911800
£14.29 (it says minimum order 4, but if you call Cradley's, they normally allow you to order just the one.)
Hope this helps
http://www.kawasakioriginalparts.com/ka ... 1992&ca=GB
Part number: 130911800
£14.29 (it says minimum order 4, but if you call Cradley's, they normally allow you to order just the one.)
Hope this helps
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
Re: pilot needle tip
thanks for the answer, but its the pilot jet not the main jet......going to have a go tommorrow with a couple of ideas...
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
Re: pilot needle tip
sorry its the pilot air jet
-
- Posts: 28
- Joined: Fri Aug 28, 2015 4:08 pm
- My Bike: ZXR400 H1
- Location: sheffield
Re: pilot needle tip
soaked it overnight in wd40 then got some compresses air and it came out .after some advice from mr Banner
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: pilot needle tip
no worries
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said