Without going into details of what ham fisted ape did what, I've found myself with a carb heater fitting which has one of the plastic arms broken.
I've read that people have removed these but I'd like to at least have a stab at getting them working again before going that route.
Am I right in thinking this is part 92005B-1291? Because it looks like like SOL unless I want to spend £40 getting one from America.
Think I could get away with using epoxy to repair it?
Carb heater fitting
Moderator: Moderators
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Carb heater fitting
If it's the angled bit that physically goes into the carb, then yes, that will come with new o rings as well
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said