I've just pulled my H model engine down and found some little bits of metal. Two bits where sitting up on top of the head in with the valve gear and two where in the sump.
They are steel and fit together to look like a peice of washer.
Problem is I can't see anything wrong and there does not seem to be a washer missing anywhere.
I've got a picture but I've no idea how to post it on here so if you think you may be able to identify these bits please e-mail me and I'll send it to you.
thanks guys
STRANGE BITS IN MY ENGINE HELP PLEASE
Moderator: Moderators
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
-
- zxr400 oc member
- Posts: 307
- Joined: Sun Mar 28, 2004 8:34 am
- My Bike: tomos moped
- Contact:
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
No definately not shims.
The four pieces I have fit together exactly I'm certain that it's one item that has gone AWOL.
Fitted together it looks like part of a washer but I can't find one missing.
I've studied all the exploded drawings I can find.
I would also say that the engine was running fine in fact it's been just sitting there since I finished the Manx with it last year
The four pieces I have fit together exactly I'm certain that it's one item that has gone AWOL.
Fitted together it looks like part of a washer but I can't find one missing.
I've studied all the exploded drawings I can find.
I would also say that the engine was running fine in fact it's been just sitting there since I finished the Manx with it last year
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk