Hi to remove the piece with all the timing marks on at the crank do I just use a 19mm spanner and a Alan key? I just can't seem to get it undone! Or am I missing something really obvious?
Thanks Matt
Cam chain help
Moderator: Moderators
-
banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Cam chain help
thats correct, spanner on the 19mm nut, then 6mm allen the centre bolt.
on one of my bikes there was little resistance, on the other i had to get out my 2' extension bar and get my weight behind it whilst also holding the spanner...it was really on there!
if you have an airgun you can also use that - thats what i now use.
on one of my bikes there was little resistance, on the other i had to get out my 2' extension bar and get my weight behind it whilst also holding the spanner...it was really on there!
if you have an airgun you can also use that - thats what i now use.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
bude-zxr
- Posts: 94
- Joined: Sun Jun 10, 2012 9:24 pm
- My Bike: ZXR 400 L4
Re: Cam chain help
Cool thanks got you're help. 