My bottom end is rattling and before I replace the engine I want to strip it to see why and if I could fix
It first
I've done the HG before but never been any further ,
Anyone advise me on the bottom end strip please
Is there a guide to stripping the bottom end ?
Moderator: Moderators
-
spudboy6
- Posts: 78
- Joined: Wed Jul 24, 2013 11:47 pm
- My Bike: zxr400 L-9
- Location: Swindon
-
CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Is there a guide to stripping the bottom end ?
Nothing here?
http://www.zxrworld.co.uk/zxr400/lmodel.html
http://www.zxrworld.co.uk/zxr400/lmodel.html
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
cargo
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Is there a guide to stripping the bottom end ?
Bottom ends don't rattle or at least that's not the word I would use to describe a noise in the bottom end.
I think it's possible to get a look at the big ends and mains without removing the top end. I've never done it but I think it's doable.
To actually remove the crank and mains you would prob need a full strip not that hard to do.....................but some level of competence would be handy.
I think it's possible to get a look at the big ends and mains without removing the top end. I've never done it but I think it's doable.
To actually remove the crank and mains you would prob need a full strip not that hard to do.....................but some level of competence would be handy.