Page 1 of 1
head gasket gone on mi 400l
Posted: Tue Apr 05, 2016 2:51 pm
by chris 400l
Any body know where i can get a manual head gasket gone on my baby i know what i doin just need tecnical data ie sequence of bolts to torque first on head and also what nm settings cheers fellow zxr ers
Re: head gasket gone on mi 400l
Posted: Tue Apr 05, 2016 3:37 pm
by Miles
zxrworld.co.uk
Has the L H & racing manual all there as well as loads of other information
Re: head gasket gone on mi 400l
Posted: Tue Apr 05, 2016 7:11 pm
by chris 400l
Cheers miles but getting hold ov em like rockin horse poo
Re: head gasket gone on mi 400l
Posted: Tue Apr 05, 2016 11:35 pm
by Miles
Just go to the website and download them as pdf files or look on eBay they come up often enough.
Re: head gasket gone on mi 400l
Posted: Wed Apr 06, 2016 9:41 am
by banner001
Re: head gasket gone on mi 400l
Posted: Wed Apr 06, 2016 1:52 pm
by Dominik
The order to tighten the bolts is engraved in the cylinder head. Torque is 25nm I think. Losen the bolts in the opposite order starting with the outer ones. Be careful with the cam covers and lose the bolts step per step over cross.
However the linked manual has more detailed information so just give it a look...
Re: head gasket gone on mi 400l
Posted: Thu Apr 07, 2016 11:54 am
by chris 400l
Thanks dominik i know how to do it am very apt just needed torque settings but cheers for info
Re: head gasket gone on mi 400l
Posted: Wed May 04, 2016 6:42 am
by fstarocka
Yes 18ft lbs / 25nm. You undo in a criss cross spiral towards center and install from center outwards in two or 3 steps.. Don't forget the 6mm bolt inside timing hole.. And the oring seal in head at front right cam chain cover (2 hex bolts), it's the primary oil feed to the cams..
Sent from my SM-G900M using Tapatalk