Shim questions zxr400

Moderator: Moderators

Post Reply
User avatar
fstarocka
Posts: 40
Joined: Wed May 04, 2016 6:33 am

Shim questions zxr400

Post by fstarocka »

Hi guys, new here and first post.. Bought a 90 h model last month.. Just put in new rings and got her running last night!!

Anyway, did some clearance checks and seems quite worn..

Exhaust were anything between 0.18-0.26mm, intake 0.18-0.22.

Very few were within spec.. Can I customize a set based on my numbers?

Thanks! Too bad I'm 6-2! This thing is tiny..

FYI took these readings cold..

Sent from my SM-G900M using Tapatalk
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: Shim questions zxr400

Post by jamesgoodfella »

Won't do that for you. If you searched you'd have found a very detailed guide on how to do this :smt120
viewtopic.php?t=8002
masterofinsanity wrote:or use a Duplo brick :smt002
Post Reply