Cam cap bolts

Moderator: Moderators

Post Reply
Johnhas
Posts: 11
Joined: Mon Apr 04, 2016 1:10 pm
My Bike: Zx400g f3

Cam cap bolts

Post by Johnhas »

Does anyone happen to know what thread an pitch they are? I'm building up an engine I got in bits and there missing, hoping to buy the bolts from a hardware store rather than pay genuine Kawasaki prices!
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: Can cap bolts

Post by jamesgoodfella »

Can cap bolts?
Got a part number?
masterofinsanity wrote:or use a Duplo brick :smt002
Johnhas
Posts: 11
Joined: Mon Apr 04, 2016 1:10 pm
My Bike: Zx400g f3

Re: Can cap bolts

Post by Johnhas »

Sorry should say "cam"
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: Can cap bolts

Post by jamesgoodfella »

Could you find the part number as there's loads of cam related bolts
masterofinsanity wrote:or use a Duplo brick :smt002
Johnhas
Posts: 11
Joined: Mon Apr 04, 2016 1:10 pm
My Bike: Zx400g f3

Re: Can cap bolts

Post by Johnhas »

92150-1083
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: Cam cap bolts

Post by jamesgoodfella »

Well according to CMSNL and Fowlers parts it says it's 6x35 so good guess is it's M6.
Plus I did buy M6 Socket heads to fit my oil cooler and it worked so yeah going with it being M6
I have got these bolts if you want to buy them though
masterofinsanity wrote:or use a Duplo brick :smt002
Johnhas
Posts: 11
Joined: Mon Apr 04, 2016 1:10 pm
My Bike: Zx400g f3

Re: Cam cap bolts

Post by Johnhas »

Yeah they are m6 x 35mm long but don't know what pitch as in 1mm 1.25 etc also think they would be high tensile 8.8, 10.9 or 12.9. Also I'm guessing there stainless steel too maybe, prob best buying genuine! Lol how much do you want for them?
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: Cam cap bolts

Post by jamesgoodfella »

I'd probably just say it's 1mm pitch, I doubt they'll have such a high tensile strength as they only are torqued up to 12Nm.
Well 16 bolts, do it for £15 posted?
masterofinsanity wrote:or use a Duplo brick :smt002
Johnhas
Posts: 11
Joined: Mon Apr 04, 2016 1:10 pm
My Bike: Zx400g f3

Re: Cam cap bolts

Post by Johnhas »

Yeah, that sounds ok, how would I pay you?
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: Cam cap bolts

Post by jamesgoodfella »

Got Paypal?
I'll PM you my address I use for that, just send it over friends and family and I'll get it sent tomorrow after work and send proof of postage etc
masterofinsanity wrote:or use a Duplo brick :smt002
Post Reply