Page 1 of 1
Standard squish - please help
Posted: Mon Jan 30, 2017 10:15 pm
by Rubencio
Hi Lads, I would need to know the piston to head clearance (squish) on a standard L8 engine.
Thanks in advance
Rubencio
Re: Standard squish
Posted: Tue Jan 31, 2017 3:08 pm
by CaNsA
Re: Standard squish
Posted: Tue Jan 31, 2017 3:27 pm
by Rubencio
Hi mate,
I have checked the manual, and look at the "top end" chapter.
I could not found this value, unless it has been called with some other name, could you please help me?
cheers
Ruben
Re: Standard squish
Posted: Tue Jan 31, 2017 4:26 pm
by CaNsA
*rolls eyes*
Chapter 4, page 5
It's right there.
Re: Standard squish
Posted: Tue Jan 31, 2017 4:44 pm
by Rubencio
chapter 4 Page 5
This is what is listed:
Valve stem diameter
Valve guide inside diameter
Cylinder inside diameter
Piston diameter
Piston/cylinder clearance
Oversize piston and rings
Piston ring/groove clearance
Piston ring end gap
Which one represent the piston to head clearance?
thanks
R.