Standard squish - please help

Moderator: Moderators

Post Reply
Rubencio
Posts: 19
Joined: Mon Nov 16, 2015 9:04 pm
My Bike: Ktm 660 Smc

Standard squish - please help

Post by Rubencio »

Hi Lads, I would need to know the piston to head clearance (squish) on a standard L8 engine.
Thanks in advance
Rubencio
Last edited by Rubencio on Tue Jan 31, 2017 9:14 pm, edited 1 time in total.
User avatar
CaNsA
zxr400 oc member
zxr400 oc member
Posts: 1741
Joined: Sat Nov 29, 2008 4:02 pm
My Bike: ZX6R F1
Location: Liverpool

Re: Standard squish

Post by CaNsA »

Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.

:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Rubencio
Posts: 19
Joined: Mon Nov 16, 2015 9:04 pm
My Bike: Ktm 660 Smc

Re: Standard squish

Post by Rubencio »

Hi mate,

I have checked the manual, and look at the "top end" chapter.
I could not found this value, unless it has been called with some other name, could you please help me?

cheers
Ruben
User avatar
CaNsA
zxr400 oc member
zxr400 oc member
Posts: 1741
Joined: Sat Nov 29, 2008 4:02 pm
My Bike: ZX6R F1
Location: Liverpool

Re: Standard squish

Post by CaNsA »

*rolls eyes*

Chapter 4, page 5

It's right there.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.

:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Rubencio
Posts: 19
Joined: Mon Nov 16, 2015 9:04 pm
My Bike: Ktm 660 Smc

Re: Standard squish

Post by Rubencio »

chapter 4 Page 5

This is what is listed:

Valve stem diameter
Valve guide inside diameter
Cylinder inside diameter
Piston diameter
Piston/cylinder clearance
Oversize piston and rings
Piston ring/groove clearance
Piston ring end gap

Which one represent the piston to head clearance?

thanks
R.
Post Reply