To get it to TDC 1,4 Do I use a spanner to move it around or an allen key in the middle? To line up the marks. Also does it go clockwise or anti clockwise, I'm assuming clockwise??
Oh yes and in the manual the F is above the T but on mine the F is below the T, is this a problem or should I still just line up the T???
I attached an image from the manual to show what I mean.
Thanks
How to move crankshaft to TDC??
Moderator: Moderators
-
- Posts: 27
- Joined: Fri Jul 21, 2006 6:57 pm
- My Bike: tomos moped
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
if i remember right i used a socket on the nut with a torque wrench.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 27
- Joined: Fri Jul 21, 2006 6:57 pm
- My Bike: tomos moped