clutch basket nut

Moderator: Moderators

Post Reply
richr
zxr400 oc member
zxr400 oc member
Posts: 68
Joined: Wed Aug 17, 2011 8:48 pm
My Bike: zxr 400

clutch basket nut

Post by richr » Thu May 31, 2012 2:09 pm

can anyone tell me if the nut is left or right hand thread as it doesnt say in the manual

thanks in advance

rich

richr
zxr400 oc member
zxr400 oc member
Posts: 68
Joined: Wed Aug 17, 2011 8:48 pm
My Bike: zxr 400

Re: clutch basket nut

Post by richr » Thu May 31, 2012 3:41 pm

Oh just thought as well

Should you line up the notches out friction plates

ta rich

richr
zxr400 oc member
zxr400 oc member
Posts: 68
Joined: Wed Aug 17, 2011 8:48 pm
My Bike: zxr 400

Re: clutch basket nut

Post by richr » Thu Jun 07, 2012 8:30 pm

For those that dont know the nut is standard fit ie right hand thread and 29mm socket

Would stilll like to know if the notches on the outside of the plates are meant to line up

ta Rich

User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: clutch basket nut

Post by RedexRobB » Fri Jun 08, 2012 8:21 pm

just looking at this thread viewtopic.php?f=118&t=12609

looks like it doesnt matter?

richr
zxr400 oc member
zxr400 oc member
Posts: 68
Joined: Wed Aug 17, 2011 8:48 pm
My Bike: zxr 400

Re: clutch basket nut

Post by richr » Sat Jun 09, 2012 10:49 am

Thanks Rob

User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8055
Joined: Thu Aug 29, 2002 12:36 am
My Bike: FZS600
Location: England
Contact:

Re: clutch basket nut

Post by masterofinsanity » Sat Jun 09, 2012 8:48 pm

aren't they supposed to line up apart from the last plate?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.

richr
zxr400 oc member
zxr400 oc member
Posts: 68
Joined: Wed Aug 17, 2011 8:48 pm
My Bike: zxr 400

Re: clutch basket nut

Post by richr » Thu Jun 14, 2012 12:31 pm

masterofinsanity wrote:aren't they supposed to line up apart from the last plate?
yes they do, but the plates i have also have some cut outs on the "tang" part of the plate as well (if that makes sense)

skullie
Posts: 101
Joined: Sun Oct 31, 2010 12:05 am
My Bike: zxr400L1 ,zx400g,zx11d3
Location: swindon ,wilts

Re: clutch basket nut

Post by skullie » Wed Jul 22, 2015 9:51 pm

Where do you get the tooling to keep the basket itself still so you can remove it ? Any ideas ?

User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 444
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: clutch basket nut

Post by Miles » Wed Jul 22, 2015 11:21 pm

Amazon, eBay

Post Reply