clutch plates

Moderator: Moderators

Post Reply
Posts: 14
Joined: Sat Oct 29, 2011 6:01 pm
My Bike: zxr 400

clutch plates

Post by alanh496 » Sat Jan 05, 2013 10:45 am

Hi guys, Just re-assembling a clutch, I seem to have seen somewhere that the outermost steel plate should be fitted with the dogs in the next cut-out in the basket, rather than in the same slot as the inner ones ? Seems a bit odd, can't imagine what this would achieve ? but what to I know ? Is the remaing memory cell completely shot, am I imgining this ? Advice appreciated. And a great new year to everyone.

User avatar
zxr400 oc member
zxr400 oc member
Posts: 457
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: clutch plates

Post by Miles » Sat Jan 05, 2013 2:14 pm

The manual states:

Install the friction plates and steel plates, starting with a
friction plate and alternating them.

Install the last friction plate fitting the tangs in the
groove on the housing

Post Reply