Page 2 of 2

Re: Just to be 100% sure...

Posted: Tue Jun 18, 2013 1:01 pm
by Vaughn
Yeah I noticed all the water drops on the engine casing lol.
Oh well top effort anyway
Thanks

Re: Just to be 100% sure...

Posted: Tue Jun 18, 2013 2:23 pm
by ross46
shook me up when i started it up afterwards, all the milky oil thought my head gasket had gone AGAIN!

Re: Just to be 100% sure...

Posted: Sun Jun 23, 2013 12:28 pm
by Vaughn
Lol, that reminds me last weekend I was in the garage tinkering and got my bike running and up to temperature.

She was sat there ticking over while I was checking round making sure everything looked ok.
I took a peak into the oil level window and there was nothing in there
That was it I started to panic and switched her off straight away.
All these things started going round my head thinking about how much damage would have been done I was gutted.

Oh hang on a minute as I pulled the bike off the stand and stood it upright oh there is oil in there it was just leaning over lol
Moral of the story never check your oil with the bike on the side stand hahahahaha

Re: Just to be 100% sure...

Posted: Sun Jun 23, 2013 3:42 pm
by ross46
Yep, happened to all of us, just remember that most off the posts on here, the answers come from previous peoples mistakes, that's how I know most of the stuff I do

Re: Just to be 100% sure...

Posted: Sun Jun 23, 2013 9:38 pm
by banner001
ross46 wrote:Yep, happened to all of us, just remember that most off the posts on here, the answers come from previous peoples mistakes, that's how I know most of the stuff I do
there is a famous quote, "learn from other peoples mistakes, you wont have time to make them all yourself"

Re: Just to be 100% sure...

Posted: Sun Jun 23, 2013 9:56 pm
by ross46
I like that! I normally go by 'you can learn something of everyone, even if its how NOT to do it'