Clutch Issue
Moderator: Moderators
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Clutch Issue
You can remove the bearing in the middle thaty will allow the rest to come out
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
Re: Clutch Issue
Hi,cargo wrote:You can remove the bearing in the middle thaty will allow the rest to come out
Sorry to ask so many dumb questions, but how do I remove that bearing? I see 2 holes in it... I read somewere (was on a ZX1400) that you put a 4mm bolt into it and pull it out that way, will that work or? I see what you mean though, pull the bearing out so the housing will move over to the left so it can be taken off.
Will I still need to swap the housings over? Will save me alot of time and effort if they're the same.
Regards
Rich
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Clutch Issue
Can't help you with that one never seen a ZXR 400 slipper clutch and don't much see the point of one never once on my road and race ZXRs have I felt that I needed one.