Re: inner spacer too late????
Posted: Thu Apr 03, 2014 11:49 pm
Yep took the rear hub off of my l3
As for the bearing I took the original to a bearing factors and had it measured so it should be ok .
Its almost as if the inner spacer is too long...
I have rebuilt the wheel as in the manual, both bearings have their circlip in place but one isn't seated fully due to the spacer
As for the bearing I took the original to a bearing factors and had it measured so it should be ok .
Its almost as if the inner spacer is too long...
I have rebuilt the wheel as in the manual, both bearings have their circlip in place but one isn't seated fully due to the spacer