what spindle do I need
Moderator: Moderators
-
stevie mac2
- Posts: 2
- Joined: Thu Nov 10, 2011 6:03 pm
- My Bike: zxr400
what spindle do I need
Hi All, new to the forum and in desperate need of help. I'm looking for a spindle that will fit my front wheel. I don't know what front wheel I have, all I know is its zx or zxr. The front end is USD zxr400. It needs to be 250 mm overall length. Bosses are 39 mm long and are 25 mm diameter. with 5 mm shoulders. Diameter of main part of spindle is 17 mm. Hope someone can help as I am going nuts. Thanks for your help in advance. Stevie
-
Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: what spindle do I need
What model is your bike ?
Or is this a ZXR conversion on another bike ?
Photos of the parts would also help !
Should be an H pin by the sounds of it.
Or is this a ZXR conversion on another bike ?
Photos of the parts would also help !
Should be an H pin by the sounds of it.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
stevie mac2
- Posts: 2
- Joined: Thu Nov 10, 2011 6:03 pm
- My Bike: zxr400
Re: what spindle do I need
Yea Its a conversion, All I know is its zxr400 USD front end and what I thought was a zx9r wheel. The measurements I gave are what I need. Maybe because Its a mishmash I,ll have to get one made up. But if anyone knows of a spindle that,ll fit straight on it would save me so much hassle. Stevie