Page 1 of 1
wheels and swingarms
Posted: Mon Aug 20, 2012 12:41 pm
by chrisrowles
I have a H2 Swingarm to put into my H1 frame.
is there any difference in the wheel, spindle and or cush drive for a h2 wheel or will my H1 wheel go straight in?
Re: wheels and swingarms
Posted: Tue Aug 28, 2012 3:17 pm
by noelb
H2 spindle is bigger so leaves everything wheel related needed for the conversion. The swingarm opening widths are the same and I'm nearly certain the alignments (chain and brake) are the same as well so if you got a pair of spacers (1.5mm wall) to bring the smaller 17mm H1 spindle to fit the 20mm slots then you might be good to go. The H2 cush drive is the same as the L (and a lot of later Kwakers) and is a good bit lighter, if you're racing its worth looking for the wheels. Not sure of H2 wheels are the same as Ls though.
Hope this helps!
Noel B.