L1 REAR WHEEL

Moderator: Moderators

Post Reply
stephen k
Posts: 18
Joined: Fri Sep 23, 2011 4:53 pm
My Bike: kh250

L1 REAR WHEEL

Post by stephen k »

HI IS THE L1 REAR WHEEL THE SAME AS THE H1 OTHER THEM THE SPINDEL SIZE WAS THINKING OF USING AN L1 REAR WHEEL AN SWAPING THE BEARING FOR H1 BEARING THANKS STEPHEN
ZX4R-F3
Posts: 95
Joined: Thu Jan 13, 2011 1:03 am
My Bike: 1988 ZX400-F3
Location: Ashton-u-Lyne

Re: L1 REAR WHEEL

Post by ZX4R-F3 »

ZX6 F3 (1997) rear wheel fitted to ZXR400 H1

Minimal modifications, swap zx6 wheel bearings for zxr400h wheel bearings, sprocket carrier bearing, circlip and dust seals are the same for both models.

Sprocket and brake disc are a straight swap.

Using 400H axle, axle sleeve and spacers, fit two 6mm spacers between caliper and mounting bracket.

Job done.

Only thing to sort is the rear hugger, have to raise it slightly.

Image

Image

Forgot to weigh wheels, the ZX6 wheel did feel a bit lighter.
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]
stephen k
Posts: 18
Joined: Fri Sep 23, 2011 4:53 pm
My Bike: kh250

Re: L1 REAR WHEEL

Post by stephen k »

THANKS
Post Reply