Page 1 of 1

Sprocket carrier movement

Posted: Mon Oct 01, 2018 8:16 pm
by Si81
Should the sprocket carrier have some slight movement, as in a slight rocking motion if you pull it towards and away from the wheel. It doesn't have any rotational movement so i'm assuming the cush drives are fine but seems odd there would be that slight rocking motion?

Re: Sprocket carrier movement

Posted: Wed Oct 03, 2018 11:36 pm
by ickle pob
Shouldn't have movement. Check the cush drive spacer is in it andyouve got wheel spacers in correct on each side