the front sprocket on my bike is knackered, does any one know where i can get one from? and is the sprocket on the H1 engine the same as the L engines?
Thanks,
James
Front Sprocket
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Front Sprocket
I beleieve they are the same. But you should change the chain and sprockets as a set and not one piece at a time. Best bet is probably Cradley's or maybe somewhere online.
-
- zxr400 oc member
- Posts: 613
- Joined: Sun Oct 21, 2007 12:24 pm
- My Bike: zx7r p6
- Location: Stafford
- zxr_oli
- zxr400 oc member
- Posts: 319
- Joined: Sat Jun 02, 2007 10:42 am
- My Bike: Daytona 675
- Location: East Sussex
Re: Front Sprocket
Yup, sprockets are the same
- jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: Front Sprocket
where can ya get the retainer thing, that slips over the front sprocket? do they supply them with the new front sprockets?
took my engine out last week, and the sprocket just fell on the floor! the retainers teeth have worn thru..
took my engine out last week, and the sprocket just fell on the floor! the retainers teeth have worn thru..
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Sprocket
don't belive they do mate, i'll have a look in my toolbox tommorrow, think i have one.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- carsounds_dan
- L-plate hell
- Posts: 268
- Joined: Mon Aug 06, 2007 10:07 pm
Re: Front Sprocket
i only replaced my front sprocket the other week, came to a tenner, it's not quack but hey ho.
the bloke before had changed the chain and rear sprocket but not the front... what a plank. the retainer is seporate, i got another one stamped out of high tensile steel for the future if i ever needed one.
cheers
dan
the bloke before had changed the chain and rear sprocket but not the front... what a plank. the retainer is seporate, i got another one stamped out of high tensile steel for the future if i ever needed one.
cheers
dan
The bike only goes as fast as you want it to...
...i know, it's great
...i know, it's great
- jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: Front Sprocket
thanks Baz.
Where did you get yr one from Dan?
Where did you get yr one from Dan?
- carsounds_dan
- L-plate hell
- Posts: 268
- Joined: Mon Aug 06, 2007 10:07 pm
Re: Front Sprocket
only the local bike shop,
called "the motorcycle centre" theyre based in blindley heath but also have a shop in felbridge.
cheers
dan
called "the motorcycle centre" theyre based in blindley heath but also have a shop in felbridge.
cheers
dan
The bike only goes as fast as you want it to...
...i know, it's great
...i know, it's great
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front Sprocket
i do have one which i believe is off the zxr400 if you want it pm me your address.masterofinsanity wrote:don't belive they do mate, i'll have a look in my toolbox tommorrow, think i have one.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.