www.zxrworld.co.uk

Can somebody please enlighten me as to what I will require to do this?

Will the GSXR master cylinder fit the handlebars/lever - or will I need a ZX7R master cylinder?

Any help is appreciated.

Cheers

GSXR M/C will fit. If you can actually bleed brakes properly you probably won't need it though

bendog66 wrote:GSXR M/C will fit. If you can actually bleed brakes properly you probably won't need it though

I can bleed properly. The garage myn went to confirmed this. lol

Just the calipers seem to be wankered that I have atm.

So the ZXR lever will fit the GSXR M/C, or will I need to use the GSXR lever?

Cheers

i'm fairly sure the ZXR lever will fit, but don't hold me to that... I know it fits the GSXR1000 K1 M/C

I use the standard zxr mc with the gsxr 4 pots. It works fine

Pretty much all you need to know!

viewtopic.php?f=55&t=3775

OH......MY.....FUCKING.....GOD!

THESE BRAKES ARE ABSOULTELY FUCKING AWESOME.

I will encourage anybody to bin there shitty brakes, and upgrade too some of these babies!

***************************************************************************

I would also like to Publically thank DaveW for sending me a set of his discs to eliminate my discs from my braking problems!
The guy is a gent! Gave me advice over the phone/in pm, and let me borrow some discs for just the price of postage

DaveW - Thank-You! Its people like you that make small communities like this great

***************************************************************************

These K2 brakes are awesome. I had the back end up a few times this morning, and I am actually beating the bigger bikes on the brakes now that I have confidence in them

Everybody needs to upgrade - NOW! lol

how are they better ? there jsut 4 pots like the standard? might just be teh betetr m.c ??

The pistons in the calipers are about 2x larger each, and they stand the bike on its nose, unlike my freshly rebuilt ZXR400 calipers.

Seriously, these are a must for all ZXR owners!

Also, I am using the same M/C as original, which I rebuilt before rebuilding the original calipers!

I take it the standard hoses fit the gixer calipers then?

I used the ones that came with the GIXXER calipers. Just used the ZXR banjo for up @ the M/C

Changing pads shortly, so will be doing a picture guide for this shizz

im in the process of upgrading to the gixer k3 1000 calipers (4 pots not the 6) and obviously going to go for braided hoses, so i wanted to know if i could bu them off the shelf an which ones? i was thinking the zxr 400 race fit ones buy goodridge?
any ideas?????

dude, they are radial calipers on the k3 aint they?

jake wrote:dude, they are radial calipers on the k3 aint they?

Yup!

Epicfail!

just sold a set of these, if id have known i would have offered them on here