Page 1 of 1

Gsxr 4 pots

Posted: Tue Oct 21, 2014 10:18 pm
by Tinman
Does anyone know the size of the spacers I might need to fit the gsxr 600 k3 calipers I have bought for my l9 zxr?

Re: Gsxr 4 pots

Posted: Fri Oct 31, 2014 8:39 am
by Damian120
Could always have them 'tapped' out to suit the original kawasaki screws. Will need an 8.2 or 8.5mm drill bit plus an M10x1.25 tap. If you do this, offer the callipers up first before putting on! Mine needed a washer on the inside of the fork leg to make them sit centrally over the disc (would scrape otherwise!)