brake pad fitment

Moderator: Moderators

Post Reply
richyrd5
Posts: 63
Joined: Fri Feb 05, 2016 12:26 pm
My Bike: 400h

brake pad fitment

Post by richyrd5 »

Hi.will J model front pads fit the H models calipers???they look the same but thought id ask First winks
richyrd5
Posts: 63
Joined: Fri Feb 05, 2016 12:26 pm
My Bike: 400h

Re: brake pad fitment

Post by richyrd5 »

Hmm.just bid and finally won ap racing organic sintered race pads for L model calipers thinking they would fit my H model calipers.so first £13 posted takes the set.or swap for H ones. :ffs
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: brake pad fitment

Post by banner001 »

UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
richyrd5
Posts: 63
Joined: Fri Feb 05, 2016 12:26 pm
My Bike: 400h

Re: brake pad fitment

Post by richyrd5 »

Thanks banner...i read it AFTER I bid on pads for later calipers :smt018
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: brake pad fitment

Post by banner001 »

richyrd5 wrote:Thanks banner...i read it AFTER I bid on pads for later calipers :smt018
good man, reads things on here, and not too proud to admit when wrong...you will fit in well, consider my garage open to you if you need a hand.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
richyrd5
Posts: 63
Joined: Fri Feb 05, 2016 12:26 pm
My Bike: 400h

Re: brake pad fitment

Post by richyrd5 »

biggrin ..cheers chap.very decent of you!...hey banner can you tell me what bodywork from L models will fit my H??.need a bodykit I rekon vsad
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: brake pad fitment

Post by banner001 »

richyrd5 wrote:biggrin ..cheers chap.very decent of you!...hey banner can you tell me what bodywork from L models will fit my H??.need a bodykit I rekon vsad
none of it :D

L model fairings are all different to H model im afraid.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
richyrd5
Posts: 63
Joined: Fri Feb 05, 2016 12:26 pm
My Bike: 400h

Re: brake pad fitment

Post by richyrd5 »

:smt017 ..ah right...thanks.
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8101
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Re: brake pad fitment

Post by masterofinsanity »

wtf I've never seen this thread before! amazing job! cheers Banner I owe you !
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: brake pad fitment

Post by banner001 »

masterofinsanity wrote:
wtf I've never seen this thread before! amazing job! cheers Banner I owe you !
i try me best boss :D
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Post Reply