so these two rods in the pic (pt43045) that are holidng the pads in. how the feck do i get em out? i have a nasty feelig they amy have siezed in and im gonna have to split the calipers.
cheers
ermm. caliper help.
Moderator: Moderators
-
- zxr400 oc member
- Posts: 307
- Joined: Sun Mar 28, 2004 8:34 am
- My Bike: tomos moped
- Contact:
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Yeah should be an R clip, if they arent seized in fill the holes that they sit in with copper grease. If they are seized good bloody luck, cos one of them were seized in my rear caliper and was a right giraffe to get out. I just ground the pin in the middle so it was in two halves and eventually with a pair of pliers and alot of twisting they came out.
- kwakbiker
- Posts: 51
- Joined: Tue Apr 11, 2006 7:19 pm
- My Bike: tomos moped
- Location: In the middle, ok south brum
- the_avenging_bucket
- Posts: 36
- Joined: Thu Apr 20, 2006 5:00 pm
- My Bike: tomos moped
- Location: Pretoria, South Africa