H Model Break Disks on a L model
Moderator: Moderators
- Head-Down
- Posts: 54
- Joined: Tue May 15, 2007 7:56 pm
- My Bike: ZXR400 L1
- Location: Cambridgeshire
H Model Break Disks on a L model
hi, iv seen some front wavey disks for the zxr400 H model and was wondering if these would fit my L model? thanks
Ride hard or die Tryin'
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: H Model Break Disks on a L model
they will fit the wheel, and have the same offset, but will have a 10mm smaller diameter. so they'll work, but wont be hit by all of the brake pad.. which would/could cause problems as the pads wear..
i wouldn't bother, just get some 310mm discs made for an L, there's loads out there
i wouldn't bother, just get some 310mm discs made for an L, there's loads out there
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: H Model Break Disks on a L model
http://cgi.ebay.co.uk/zxr400-wavey-fron ... dZViewItem
If you want something fancy, i have these on my L model and they work pretty damn well Good price too, i bought a set which included the front and rear disks and a set of pads all round all for £350. Just the fronts on thier own i think are in the region of £250. Just whatever you do, dont goto the place where you can buy them new, they are absolute twats.
If you want something fancy, i have these on my L model and they work pretty damn well Good price too, i bought a set which included the front and rear disks and a set of pads all round all for £350. Just the fronts on thier own i think are in the region of £250. Just whatever you do, dont goto the place where you can buy them new, they are absolute twats.
- zxr_oli
- zxr400 oc member
- Posts: 319
- Joined: Sat Jun 02, 2007 10:42 am
- My Bike: Daytona 675
- Location: East Sussex
Re: H Model Break Disks on a L model
Where are these H disks?
I want want some wavey ones, thats as soon as i get some money, and sort my valves :p
I want want some wavey ones, thats as soon as i get some money, and sort my valves :p