Hi all. got a prob. the bleed nipple has stripped the thread on the caliper and wont nip up. i had the same on the rear a few yrs ago but just chemical metalled it up as it had another bleed nipple on the other side of the caliper.
I dont have that luxury with the front caliper. any ideas?
Nadges! Stripped Thread.
Moderator: Moderators
- diesel
- zxr400 oc member
- Posts: 512
- Joined: Wed Oct 09, 2002 5:47 pm
- My Bike: Zx7r
- Location: Kings Lynn, Norfolk
- Contact:
- jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: Nadges! Stripped Thread.
how bad is it? could you strip it and retap the thread?
- diesel
- zxr400 oc member
- Posts: 512
- Joined: Wed Oct 09, 2002 5:47 pm
- My Bike: Zx7r
- Location: Kings Lynn, Norfolk
- Contact:
Re: Nadges! Stripped Thread.
do they do larger bleed nipples? thats an option i spose. its too bad to be tapped out to the same size.
- zxr_oli
- zxr400 oc member
- Posts: 319
- Joined: Sat Jun 02, 2007 10:42 am
- My Bike: Daytona 675
- Location: East Sussex
Re: Nadges! Stripped Thread.
Tap a new thread then use a helicoil to bring it back to size?
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Nadges! Stripped Thread.
yes you can get a bigger bleed nipple so you could always drill and tap it out a size.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: Nadges! Stripped Thread.
masterofinsanity wrote:yes you can get a bigger bleed nipple so you could always drill and tap it out a size.
+ 1
helicoils wont work, the fluid will seep out.