www.zxrworld.co.uk

its hard to measure them while theyre on the bike y'know! does anyone know what diameter l model front discs are? my best guess is 310mm

with H models being 10mm smaller

also has anyone here tried puttin nissin 4 pots from a cbr600rr on zxr? i hear theyre better than the gsxr sets some people use.

i think the Ls are 320mm and H's 310mm?

http://www.allbikeengineering.co.uk/html/kawasaki1.html

this place has them both as 310mm

mcn has them at 310..... but then again every other statement from them is complete lies!

http://www.motorcyclenews.com/MCN/biker ... &R=EPI-284

yeah MCN also state the rear brake is a 240mm drum

masterofinsanity wrote:yeah MCN also state the rear brake is a 240mm drum

i think that about sums up the accuracey of their 'journalism'

is there any other way to tell from sight alone if a disc is L or H? is the carrier black only on the L, any markings etc?

I think its marked on the disc carrier, the diameter isnt it?

RedexRobB wrote:I think its marked on the disc carrier, the diameter isnt it?

not that i can see...

unless its the thickness ive seen? Sure ive seen something printed on the carriers before

what you've seen robB is the min thickness of your disc. and i quote disc not dick

310 for the L , 300 for the H

ive seen some zxr's with fireblade nissin 4 pots, there probs the same as the 600.
They said they where good, did'nt ask about the fittin tho

masterofinsanity wrote:what you've seen robB is the min thickness of your disc. and i quote disc not dick

That could well be it then!

jake wrote:
310 for the L , 300 for the H

ive seen some zxr's with fireblade nissin 4 pots, there probs the same as the 600.
They said they where good, did'nt ask about the fittin tho

apparently they need drilling out for 8mm to 10mm then they fit straight on with a washer or two. ive had enough of having to take me calipers of once a month and clean the pistons etc! ive spend no end on them and theyre still goose!

Hi, what year fireblade calipers ? please