My friend is in need of some front shocks for her H model. I cant seem to find any anywhere so just wondering if there are any other forks that can be used?? Say out of a 750 or sumit?
She's had her seals done loads of times and they still keep going wrong so she just wants some good forks as its just not worth doing the seals again.
Any help would be appreciated as she needs to get her bike done either this week or next and we just dont know what to do
Cheers in advance
Front shock problems
Moderator: Moderators
-
- L-plate hell
- Posts: 285
- Joined: Fri May 18, 2007 8:33 am
- My Bike: zxr 400 h1
- Location: Norwich , norfolk
- masterofinsanity
- Site Admin
- Posts: 8102
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Front shock problems
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- L-plate hell
- Posts: 285
- Joined: Fri May 18, 2007 8:33 am
- My Bike: zxr 400 h1
- Location: Norwich , norfolk
Re: Front shock problems
cheers fella.
- mycallsevern
- Posts: 170
- Joined: Thu May 17, 2007 10:42 am
- My Bike: ZXR400 L3 UK spec
- Location: Exeter
- Contact:
Re: Front shock problems
Heres some on eBay, not sure if they will be in better condition than the ones she already has though?
http://cgi.ebay.co.uk/Kawasaki-ZXR-ZXR4 ... dZViewItem
http://cgi.ebay.co.uk/Kawasaki-ZXR-ZXR4 ... dZViewItem
Rubber side down, rubber side down, rubber side down.
-
- zxr400 oc member
- Posts: 355
- Joined: Mon May 07, 2007 11:38 pm
- My Bike: ZZR1100C3
- Location: Nottingham
- Contact:
Re: Front shock problems
If they are the ones from Barton Motors they're shagged, don't touch them.
I've personally been through his entire store room looking for a decent pair and they haven't got any - I bought the only two that weren't pitted to f*** last month.
I've personally been through his entire store room looking for a decent pair and they haven't got any - I bought the only two that weren't pitted to f*** last month.
zxr400 h2 (breaking)
zzr1100c3 (broken)
Vespa et4 (almost broken)
My FleaBay
"Save the planet, eat a vegan .." - Clarkson
zzr1100c3 (broken)
Vespa et4 (almost broken)
My FleaBay
"Save the planet, eat a vegan .." - Clarkson
-
- zxr400 oc member
- Posts: 584
- Joined: Tue Feb 06, 2007 7:48 pm
- My Bike: Unique ZXR400
- Location: Little Sutton Cheshire
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Front shock problems
H model fork legs are 1mm thinner than the L.
-
- zxr400 oc member
- Posts: 355
- Joined: Mon May 07, 2007 11:38 pm
- My Bike: ZZR1100C3
- Location: Nottingham
- Contact:
Re: Front shock problems
^ Yes you can't use L forks on a H.
Disks are different too.
Disks are different too.
zxr400 h2 (breaking)
zzr1100c3 (broken)
Vespa et4 (almost broken)
My FleaBay
"Save the planet, eat a vegan .." - Clarkson
zzr1100c3 (broken)
Vespa et4 (almost broken)
My FleaBay
"Save the planet, eat a vegan .." - Clarkson
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Front shock problems
Not according to the microfiches they arent, they are the same