Adjusting zxr 400 euspension

Moderator: Moderators

Post Reply
jigga1980
Posts: 55
Joined: Fri Jun 22, 2007 12:13 pm
My Bike: zxr 400 L9, zzr250
Location: Wolverhampton

Adjusting zxr 400 euspension

Post by jigga1980 »

Has anyone adjusted theirs from factory settings?

I know the rear suspension is hard as standard. Would adjusting the damping help.

Went over a bump the other day, around 60 ish. Jarred my back it's been really huring although getting better now
after 5 days or so. I know it's not designed as a tourer or anything but if the roads aren't great, many aren't around here it's very hard on your body.
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8102
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Re: Adjusting zxr 400 euspension

Post by masterofinsanity »

Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
jigga1980
Posts: 55
Joined: Fri Jun 22, 2007 12:13 pm
My Bike: zxr 400 L9, zzr250
Location: Wolverhampton

Re: Adjusting zxr 400 euspension

Post by jigga1980 »

No, Thanks!
jigga1980
Posts: 55
Joined: Fri Jun 22, 2007 12:13 pm
My Bike: zxr 400 L9, zzr250
Location: Wolverhampton

Re: Adjusting zxr 400 euspension

Post by jigga1980 »

Adjusted the damping on the rear to setting 1. It was on 2. On 4 it hardly moves!

Yet to test it on the road. Will see how it is before adjust any other settings or the front.

Don't really want ot adjust the front as I can feel what it's doing and get good feedback.

Rode my mate's zx6r 1999. Granted 100 yards into a van but when I braked the front end felt very soft.
Post Reply