Replaced seals, but still seems to be leaking ???

[reds]

Hi guys,

I have just topped up my forks after replacing the seals.

When I push down on them there is a fine layer of oil on the lower leg - is this normal ??? i dont know if it is supposed to do this or not, doesnt seem right to me

is it possible the seals are in the wrong way ? i have them with the flange facing upwards, and the bottom section (facing downwards) is the one with a recess in it with what looks like a spring.

would appreciate any help - before I put them on the bike if they are not right !!!

[masterofinsanity]

think the seals are in the wrong way mate which is why they are leaking still.

[reds]

yeah they were - sorted now thankfully

popped front wheel back in - does the spindle sit completly flush ? as at present theres a couple of mil overhang to the one side (by the speedo drive) whereas the other is flush