Hi all
New here and I only have a small part of a ZXR400 too - sorry but at least most of the machine is Kawasaki (for the time being)
I am updating a KR1 chassis fitted with a Yamaha 350 ypvs engine. Currently it is standard but a ZXR400H front end is in the shed along with an RGV rear wheel and R6 shock. Anyway, I bought the complete front end and in my enthusiasm completely forgot to get any handlebars
I have a left one from Ebay on its way but there are no right ones for the H model at the moment. So, my question is will others from later models fit the H top fork leg i.e. can I just get any old ZXR400 right clipon and mount.
Thanks
Clip-on fork mounting diameter
Moderator: Moderators
-
- Posts: 2
- Joined: Wed Feb 10, 2010 7:44 am
- My Bike: KR1/ypvs
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Clip-on fork mounting diameter
see this thread for more info.http://zxrworld.co.uk/zxr400oc/viewtopi ... 124&t=9859
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 2
- Joined: Wed Feb 10, 2010 7:44 am
- My Bike: KR1/ypvs
Re: Clip-on fork mounting diameter
Brilliant thanks. This is going onto a KR1 frame so didn't think to look in the frame section. Answers all my questions though