Clip-on fork mounting diameter

Moderator: Moderators

Post Reply
Yamasaki
Posts: 2
Joined: Wed Feb 10, 2010 7:44 am
My Bike: KR1/ypvs

Clip-on fork mounting diameter

Post by Yamasaki »

Hi all

New here and I only have a small part of a ZXR400 too - sorry :tease but at least most of the machine is Kawasaki (for the time being)

I am updating a KR1 chassis fitted with a Yamaha 350 ypvs engine. Currently it is standard but a ZXR400H front end is in the shed along with an RGV rear wheel and R6 shock. Anyway, I bought the complete front end and in my enthusiasm completely forgot to get any handlebars oldman

I have a left one from Ebay on its way but there are no right ones for the H model at the moment. So, my question is will others from later models fit the H top fork leg i.e. can I just get any old ZXR400 right clipon and mount.

Thanks
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8101
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Re: Clip-on fork mounting diameter

Post by masterofinsanity »

Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
Yamasaki
Posts: 2
Joined: Wed Feb 10, 2010 7:44 am
My Bike: KR1/ypvs

Re: Clip-on fork mounting diameter

Post by Yamasaki »

Brilliant thanks. This is going onto a KR1 frame so didn't think to look in the frame section. Answers all my questions though :smt004
Post Reply